The C-MORE Systems C3 1-6×24 was designed around the AR platform, for competition and recreational shooting. Machined from aircraft aluminum alloy, fitted with lockable target turrets with elevation zero stop for instant return to zero setting. Reticle drops and click adjustments are in yards and inches; ballistics based on a 200 yard zero, for a 55 grain bullet exiting the bore at 3150 fps. Five and ten mph wind tick marks are provided on all drops. Coated optics ensure the maximum light transmission and clarity for the cleanest sight picture possible. An illuminated center dot is provided for rapid unity power aquisition; while the lack of a verticle crosshair above the horizontal crosshair produces an uncluttered field of view. A ranging scale is available for unknown target distances.
The TJ1I reticle was designed for fast target acquisition at multiple distances.
Ballistics are based on a 200 yard zero, for a 55 grain bullet exiting the bore at 3150 fps. Set in the 2nd focal plane, the reticle does not change size when changing power, only the target size changes. An illuminated center Red dot is provided for fast target acquisition at closer distances, while the calculated bullet drop subtensions provide instant points of aim with 5 and 10 mph wind tick marks out to 800 yards. The ranging scale on the left side is used to estimate target distance at 6x and is calibrated for a 30 inch high IPSC target. The lack of a verticle crosshair above the dot provides an uncluttered field of view.
The new Tanfoglio Xtreme Titan Hammer has been designed in cooperation with Eric Grauffel to meet the requirement of shooters.
The new weight distribution permits shooters to use factory ammunitions with light hammer springs, and therefor permits to reduce the trigger pullweight, especially for Production Division.